Installation and Operating Manual
Stratotimer ST3
31-20-01
Page 14
DESCRIPTION AND OPERATION
Revision: 1.00
12/06/2020
4.3 Overview of S-video and Timer Functions
Access and control of the different video and timer functions is done using the four push-
buttons and the push / turn control knob (refer to Figure 5).
To navigate through the video and timer options, turn the control knob clockwise until UTC
is displayed above the top line of the display and ET is above the bottom line of the display.
(Further turning of the control knob clockwise has no effect.)
Turn the control knob counter-clockwise to navigate to the following options:
•
Universal time coordinated (UTC) (top line of display) with elapsed timer (ET) (bottom
line of display)
•
Universal time coordinated (UTC) (top line of display) with elapsed timer down (ETD)
(bottom line of display)
•
Local time (LT) (top line of display) with elapsed timer down (ETD) (bottom line of
display)
•
Date (top line of display) with elapsed timer down (ETD) (bottom line of display)
•
S-video
Continue to turn the control knob counter-clockwise to navigate the above options again,
starting from the UTC with ETD option.
The four push-buttons have the following functions (from left to right):
•
Flight timer (FT)
•
Elapsed timer (ET)
•
Elapsed timer down (ETD)
•
Back / reset
A short press of any of the first three buttons enables start / stop of the function. A long press
of the buttons enables a reset of the function.
A short-press of the control knob enables the setting function. Turn the control knob counter-
clockwise until the DATE is blinking, then turn clockwise to navigate to the following options:
•
Date
•
Local time (LT)
•
Universal time coordinated (UTC)
•
Flight timer (FT)
•
Elapsed timer down (ETD)
•
Elapsed timer (ET)
Turn the control knob counter-clockwise to navigate the above options in the reverse
direction.
Short-press the control knob when the desired option is blinking to change the values.
Change the values by turning the control knob, then confirm by short-pressing the control
knob.
Escape from any settings and return to the default display by pressing the back / reset button.
Summary of Contents for STRATOTIMER ST3
Page 3: ......
