Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
22
Chapter 2: WEB Configuration
To make sure that you can access the Internet successfully, please check the following first.
1.
Make sure the connection (through Ethernet or USB) between the Wireless Voice Gateway and
your computer is OK.
2.
Make sure the TCP/IP protocol is set properly.
3.
Subscribe to a Cable Company.
4.
Make sure appropriate LEDs are turned on for normal operation as noted in the previous
chapter.
Accessing the Web Configuration
The
Wireless Voice Gateway
offers local management capability through a built in HTTP server and
a number of diagnostic and configuration web pages. You can configure the settings on the web page
and apply them to the device.
Once your host PC is properly configured; please proceed as follows:
1.
Start your web browser and type the private IP address of the Wireless Voice Gateway on the
URL field:
192.168.0.1.
2.
After connecting to the device, you will be prompted to enter username and password. By
default, the username is “ ” (empty) and the password is “
admin
”.
Fig. 6 Dialogue for Login
If you login successfully, the main page will appear.
Please Note; some of the WEB pages shown later, will differ for different software versions and per service providers instructions.