• This appliance is not a toy; keep it away from children. We recommend letting children use the appliance under
the supervision and responsibility of their parents.
• Never let children insert foreign objects into the appliance.
• Due to the effect of electrostatic and/or fast electrical transient phenomena, the product may not operate
properly and will need to be reset by the user.
LASER APPLIANCE
ATTENTION: This appliance is part of the CLASS 1 category of LASER products. To avoid direct exposure to the
laser ray, do no try to open the cover. Do not look directly at the laser beam.
Never touch the laser lens located inside the disk compartment.
WARNING CONCERNING THE ELECTRICAL CABLE.
• Do not use the appliance if it or the electrical cable is faulty.
• If the electrical cable is faulty, it must be replaced by the manufacturer, an authorized repairer or any qualified
person, in order to avoid any danger.
• You are recommended to plug appliances into a dedicated circuit: they must not be plugged into a multi-plug,
instead they must be directly plugged into a mains socket. Do not overload mains sockets.
Overloaded, loose or damaged mains sockets, frayed electrical cables, extension cords, or cracked or damaged
insulation wires, are dangerous. These situations can cause a fire or an electrical discharge.
• Inspect the appliance's electrical cable regularly, and if it shows signs of weakness unplug it. Do not use the
appliance until the electrical cable has been replaced by a qualified person.
• Protect the electrical cable from physical or mechanical stresses: make sure that it is not distorted, tangled,
pinched, stuck or crushed. Pay particular attention to the plugs, mains sockets and the electrical cable where it
exits from the appliance.
• Disconnect the cable from the mains power supply by grasping the electrical cable's plug. Do not pull on the
cable.
• When you install the appliance, make sure that the plug can be accessed easily, so that it can be unplugged
quickly if necessary.
