1. SwitchontheCOMBOyouwanttocontrol.
2. Hold down the
S
(
10
) until the
red indicator
lamp
(
1
) remains lit (the indicator light remains on
forafewsecondstogiveyouthetimetoproceedwith
the following steps.The indicator lamp flashes when
thistimeisalmostup,andthengoesoff).
3. Press the
TV
(
3
) key, then follow one of the
programming methods (A, B, C or D) described
earlier.
4. Ifasecondcodeprogrammingisrequired,thenrepeat
steps2and3above.
4 - How to retrieve
a programmed code
It may be useful to retrieve the code programmed in the
remote control.
1. Holddownthe
S
(
10
)untilthe
red indicator lamp
(
1
) remains lit (the indicator light remains on for a
fewsecondstogiveyouthetimetoproceedwiththe
following steps.The indicator lamp flashes when this
timeisalmostup,andthengoesoff).
2. Press the key (
3
) that corresponds to the type of
equipmentyouwanttocontrol:
TV
:televisionset,
VCR/DVD
:videocassetterecorder,DVDplayer,
DVB-T
:DVBTreceiver,
SAT
:satellite.
3. Press
S
(
10
) again briefly.The
red indicator lamp
(
1
)flashesonce.
4. Press the number keys (
0
to
9
) in ascending order
untiltheredindicatorlamp(
1
)flashesonce.
5. Thedigitwhichmadetheredindicatorlamp(
1
)flash,
is the first number of the 4-digit code. Please make
noteofit.
6. Repeat step 4 to find out the other numbers of the
code.
7. When the fourth number is found, the red indicator
lamp(
1
)goesoff.
5 - Check of the programming
-Foratelevisionorasatellitereceiver:switchonand,for
example,press(
15
)tochangechannels.
-DVDplayer:loadaDVDandthenpress
PLAY
(
6
).
Try other remote control keys to find out the range of
functionsyoucancontrol.Ifyouthinkthatnotallofthe
keysareactive,trytheprogramming
Method B
or
C
.
When you have retrieved the code of your set, jot
it down so that you can use it whenever needed.
After battery replacement, you may have to
programme the remote control again.
7 - The NAVI
LIGHT
system
The THOMSON
NAVI
LIGHT navigation system allows you
easy access to the settings of your television set (TV) or your
video recorder (VCR) fitted with the THOMSON
NAVI
LIGHT
system provided that you have allocated the
VCR/DVD
or
SAT
keys to the video recorder.
1. Switchonthesetyouwanttocontrol.
2. Press the key corresponding to the type of set you
want to use (
TV
,
VCR/DVD
, or
SAT
). In the
VCR/DVD
position, make sure that theAV mode is
activatedfortheTVset(theSCARTsocketmustbe
selected).
3. Pressthe
S
(
10
)keyonceandthenpressthe
a
(
16
)
key.
4. Navigatethroughthesettingmenuswiththeplaykeys
p
,
q
,
t
and
u
(
9
and
15
).
5. Validatewith
OK
(
14
).
6. Toleavethemenus,presskey
EXIT
(
8
)once.
Note: The
S
(
10
) key remains on as long as light
I
is lit. If this
light goes out, you have to press the
S
(
10
) key again before
using the navigation keys. To exit this mode, press
S
(
10
) a
second time.
ROC 4306 / EN / aws - rst / 12-2006
GB
6 - Other functions
Adjustment of ALL volume controls under a
specific mode.
Youcanallocatethevolumecontroltooneofthemodes
of the remote control on condition that the volume
controlexistsonthecorrespondingdevice(e.g.controlof
TVsoundinVCR/TVmode).
1. Hold down the
S
(
10
) key until the
red indicator
lamp
(
1
)remainslit.
2. Releasethe
S
(
10
)key.
3. Pressthe
c
(
14
)key.The
red indicator lamp
(
1
)
flashesonce.
4. Press once on the mode key (
TV
,
VCR/DVD
…)
correspondingtothedevicewhosevolumewillalways
becontrolledbythe
VOL
(
9
)and
c
(
14
)keys.
5. Pressthe
c
(
14
)keyonce.
Adjustment of the volume controls for EACH
mode.
You can decide that the volume control is functional for
eachmodeselectedonconditionthatthevolumecontrol
exists on the corresponding device (e.g. control of the
televisionsetsoundinTVmode,thecontrolofthesound
oftheSATreceiverinSATmode,...).
1. Hold down the
S
(
10
) key until the
red indicator
lamp
(
1
)remainslit.
2. Releasethe
S
(
10
)key.
3. Pressthe
c
(
14
)key.The
red indicator lamp
(
1
)
flashesonce.
4. Press once on the mode key (
TV
,
VCR/DVD
…)
correspondingtothedevicewhosevolumewillalways
becontrolledbythe
VOL
(
9
)and
c
(
14
)keys.
5. Pressthe
VOL -
(
9
)keyonce.
6. Pressthe
c
(
14
)keyonce.
You can contact THOMSON by dialling:
0871 500 0520
(call to this number
will be charged at 10 pence per minute)
www.thomsonlink.com
TV CODE
VCR/DVD CODE
TVB-T CODE
SAT CODE
01_ROC4306_GB.indd 3
8/12/06 9:50:22
