background image

EN

1

English

Important information

Safety

Ensure that your domestic mains supply voltage 

matches the voltage indicated on the identification 

sticker located at the back of your set. Where the mains 

plug or an appliance coupler is used as disconnect 

device, it shall remain readily operable.

On certain models, the light indicator is located at the 

side of the TV set. The absence of a light indication 

at the front does not mean that the TV set is fully 

disconnected from the mains. To disconnect the TV set 

completely, the mains plug must be pulled out.

The TV set’s components are sensitive to heat. The 

maximum ambient temperature

 should not exceed 

35º

 Celsius. Do not cover the vents at the back or 

sides of the TV set. Leave sufficient space around it to 

allow adequate ventilation. Install the appliance away 

from any source of heat (fireplace, etc.) or appliances 

creating strong magnetic or electric fields.

Moisture

 in rooms where the set is installed should not 

exceed 

80%

 humidity. Moving the set from a cold place 

to a warm one can cause condensation on the screen 

(and on some components inside the TV set). Let the 

condensation evaporate before switching the TV set on 

again.

WARNINGS 

This appliance is intended for domestic household use 

only and should not be used for any other application, 

such as for non-domestic use or in a commercial 

environment.

If the external flexible cable or cord of this product is 

damaged, it shall be replaced by the manufacturer or 

his service agent or a similar qualified person in order to 

avoid a hazard.

Leave more than 10cm clearance around the television 

to allow adequate ventilation. The ventilation should not 

be impeded by covering the ventilation openings with 

items, such as newspapers, table-cloths, curtains, etc.

The apparatus shall not be exposed to dripping or 

splashing and no objects filled with liquids, such as 

vases shall be placed on the apparatus.

Batteries shall not be exposed to excessive heat such 

as sunshine, fire or the like.

An apparatus with CLASS I construction shall be 

connected to a MAINS socket outlet with a protective 

earthing connection.

To prevent the spread of fire, keep candles or 

other open flames away from this product at all 

times.

WARNING: To prevent injury, this apparatus must be 

securely attached to the floor/wall in accordance with 

the installation instructions.

CAUTION: 

Connect headphones with the volume 

set low and increase if required. Prolonged listening 

through headphones at high volume settings can result 

in hearing damage.

Eye Fatigue

When using this product as a computer monitor, health 

and safety experts recommend short frequent breaks 

rather than occasional longer breaks. For example a 

5-10 minute break after an hour of continuous screen 

work is considered to be better than a 15 minute break 

every 2 hours.

Do not use the monitor against a bright background or 

where sunlight or other bright light sources will shine 

directly onto the screen.

The   or 

POWER/

 button on the TV set or the   

button on the remote control can be used to switch it on 

and put it into standby mode. If you are 

not going to be 

watching the TV for a lengthy period of time

, switch 

it off completely by removing the plug from the mains 

power socket.

During 

thunderstorms

, we recommend that you 

disconnect the TV set from the mains and aerial so 

that it is not affected by electrical or electromagnetic 

surges that could damage it. For this reason, keep the 

mains and aerial sockets

 accessible so they can be 

disconnected

, if necessary.

Unplug

 the TV set immediately if you notice it giving off 

smell of burning

 or 

smoke

. You must never, under 

any circumstances, open the TV set yourself, as you run 

the risk of an 

electric shock

 in doing so.

TV screen

The TV screen used in this product is made of glass. 

Therefore, it can break when the product is dropped or 

impacted upon by other objects.

The TV screen is a very high technology product, 

giving you finely detailed pictures. Occasionally, a few 

nonactive pixels may appear on the screen as a fixed 

point of blue, green or red. This does not affect the 

performance of your product.

Care

Use a glass-cleaning product to clean the screen and a 

soft cloth and mild detergent to clean the rest of the set.

Important: 

Using strong detergents, alcohol-based and 

abrasive products may damage the screen.

Dust the vents at the back and sides regularly. Using 

solvents, abrasive or alcohol-based products could 

damage the TV set. If an object or liquid enters the 

appliance, unplug it immediately and have it checked 

by an authorized engineer. Never open the appliance 

yourself since this may put you at risk or damage the 

appliance.

ESD regulation

This apparatus meets ESD performance criteria. In case 

the apparatus does not recover in Ethernet connection 

mode due to electrostatic discharge, user interference is 

required.

Bluetooth function notice

Bluetooth® technology (if available in your TV) uses 

2.4GHz frequency thus close proximity to WiFi access 

points, routers or microwave ovens might interfere with 

Bluetooth® audio streaming. If you face interruptions 

in audio reception, you should restart your Bluetooth® 

device to find frequency with less interferences and if 

Summary of Contents for 50UA6406
























Reviews: