9
ENGLISH
On/Standby
Using set keypad:
Press the On/Standby key.
Using remote control:
Switch the receiver on by pressing one of the numeric keys (0 to 9),
or
on the
remote control keypad.
If the set is switched on using the
or
keys, the last programme number active
before switching off is called up, for example : " 13".
To switch the set off, press the Standby key.
The display shows : " -"
Programme Selection
Using set keypad:
Press the programme scrolling keys
GH
Using remote control:
a) Direct selection using numeric keys 0 to 9, or
b) Channel scrolling using the
or
.
a) Direct selection:
For the first ten programmes, press the corresponding key briefly.
For two- or three-digit programme numbers, the number must be entered in three
seconds.
For example, to select Programme 14:
- Briefly press the 1 key " -1" appears on the display.
- Press the 4 key within three seconds to display " -14".
Programme 14 is displayed on the screen.
Examples:
Enter 1
Display : -1
Programme 1
appears on screen
Enter 24
Display : -24
Programme 24
appears on screen
Enter 399
Display : 399
Programme 399
appears on screen
b) Channel scrolling using the
or
keys.
Press the
key to select the next programme.
Press the
key to select the further programme.
Volume Adjustment
You can adjust the receiver volume using the VOL + (louder) and VOL - (softer) keys. The
last setting in use is stored in memory when the receiver is placed on Standby.
EVERYDAY USE
