Factory Alignment Specification of normal SIACP
Page 16 of 19
Appendix
s
“
How to download FLASH SW for MEMC module
”
Prepare MSTAR SW tool for update:
Install the driver:CDM_Setup.exe
Save the MS_TV folder to your PC,
1. Connect the PC to the I2C connector on board using a special I2C device (USB or COMx).
2. Provide a correct voltage to the board.
3. Start
“
ISP_Tool.exe
” application under MS_TV folder:
4. Press “config” button On the Menu to enter the corresponding page, change the ISP slave
address to “0x94” and confirm that if the Port Type is correct, correct it if not.