EN
Settings
5
Display
Setting the Clock
1. Press
CLOCK•TIMER
to enter clock setting
mode. CLK XX:XX will show on the display.
2. Press
TUNING -
or
+
to set the hour.
3. Press
PROG•SET•CLEAR
to shift to the minute
digits.
4. Press
TUNING -
or
+
to set the minute.
5. Press
PROG•SET•CLEAR
to confirm the
setting.
Setting the Timer
1. Press
CLOCK•TIMER
twice to enter timer on
setting mode. ON XX:XX will show on the
display.
2. Press
TUNING -
or
+
to set the hour.
3. Press
PROG•SET•CLEAR
to move to the
minute digits.
4. Press
TUNING -
or
+
to set the minute digits.
5. Press
PROG•SET•CLEAR
to move to source
selection.
6. Press
TUNING -
or
+
to select source (Tape /
Tuner / CD / Rec TU)
7. Press
PROG•SET•CLEAR
to move to volume
setting.
8. Press
TUNING -
or
+
to select desired volume
level.
9. Press
PROG•SET•CLEAR
to move to timer off
time setting. OFF XX:XX will show on the
display.
10. Repeat steps 3-5 to set timer off hour and
minute.
11. Press
PROG•SET•CLEAR
to confirm settings.
Timer will be activated automatically after settings
are finished.
Activating the Timer
Press and hold
CLOCK•TIMER
for 2 seconds on the
main unit to activate and deactivate the timer
function.
Timer can not be set or activated if clock time is
not set.
SET CLK
will flash on the display when you
try to activate the timer. Follow instructions under
“Setting Clock Time” to set clock.
If timer settings have not been entered,
SET TMR
will flash on the display when you try to activate
the timer. Follow instructions under ”Setting the
Timer” to enter timer settings.
If timer off time is set as the same as timer on
time,
TIMER NG
will flash on the display. Set the
correct timer off time again.
Setting Sleep Time
Press
SLEEP
on the remote control to toggle
among OFF, 90, 80, 70, 60, 50, 40, 30, 20, and 10
minutes.
Note:
Note:
Note:
Note:
Note:
Thomson models show time in 24-hour
standard.
R
P
CS104 EN
3/8/04, 1:46 PM
8
