Solution
• Check power cord for a secure
connection.
• Unplug the unit for a moment,
and then plug into power
source again.
• Check the outlet by plugging in
another device.
• Increase the volume setting.
(Refer to P.9)
• Check connection to speakers.
(Refer to P.3)
• Check that you have selected
the appropriate function: CD,
Tuner.(Refer to P.4)
• Make sure mute is off.
• Make sure headphones are not
plugged in.
• Check antenna
connection.(Refer to P.3)
• Move antenna.
• Turn off nearby electrical
appliances, such as hair dryer,
vacuum cleaner, microwave,
fluorescent lights.
• Check that CD is in the
tray.(Refer to P.11)
• Check that CD label is facing
up.(Refer to P.11)
• Check that PAUSE mode is not
on.(Refer to P.11)
• Check that CD function is
selected.(Refer to P.4)
• Use CD lens cleaner.(Refer to
P.28)
• Clean the disc.(Refer to P.28)
• Try another CD.
• Switch to another function
(Tuner) then back
to CD. (Refer to P.4)
Problem
System will
not turn
on
No sound
Poor radio
reception
CD does
not play
Problem
CD sound
skips
Remote
control
does not
work
Solution
• Clean the disc.(Refer to P.28)
• Check disc for warping,
scratches, or other damage.
• Check if something is causing
the system to vibrate. If so,
move the system.
• Make sure the speakers are at
least 3 feet away or on a
different surface from the
main unit.
• Check that the batteries are
properly installed.(Refer to
P.7)
• Replace weak batteries.
• Check the system is plugged
into power source.
• Point the remote directly at
the system’s front panel.
• Move closer to the system.
• Remove any obstacles
between the remote and the
system.
Troubleshooting Tips
Main Unit
EN
26
CS196 EN 17/2/06 7:29 PM Page 33
