DFT-6300 Battery Load Bank Instruction Manual
20
Enter the battery discharge parameter setting interface, the interface is as follows
In the battery discharge parameter setting interface, the parameter site number to be set (replace the name of the
site under test with a number), the string number (different groups in the station under test), the number of units
(the number of single-cell cells in the whole group), the voltage level (the string voltage level is set according to
the rated nominal), the battery type (refers to the rated nominal voltage of the single-cell cell battery), the
nominal capacity (refers to the actual nominal capacity of the single-cell cell battery), the discharge capacity (the
discharge capacity of the proposed battery string ), the termination voltage (refers to the termination value of the
entire set of voltages), Single-cell-cell termination voltage (refers to the single-cell-cell battery termination
voltage), discharge current (the amount of discharge current to be performed on the battery string under test),
discharge duration (proposed discharge time setting for the battery string under test), discharge time rate (refers
to the time rate at which the current of the battery string under test is to be set, such as 10 hour rate, 20 hour rate,
etc.)
When the discharge parameters are set, press the "Start" key to complete the save and enter the discharge
monitoring interface.
4.2.2 Battery discharge process
After completing the discharge setting, press the [Start] button to enter the discharge status indication interface,
the interface is as follows:
