24
EN
PORTABLE DVD PLAYER
DP7200
PLAYING
Playing jpeg
The DVD player is able to read a CD with JPEG picture files.
• Open the disk compartment by sliding
OPEN
.
• Insert the disc, label facing downwards.
• Close the disc compartment.
• A list of the files contained on the CD will appear on
the screen.
Browsing playback interface
• Use
a
or
d
to scroll through the lists on the right and left.
• Use
s
or
w
to select an element on each list. Select an
option, and then press
ENTER
.
• Use
s
,
w
,
a
and
d
to select a file for display, and then
press
ENTER
File display according to type
• Select Filter on the right list using
d
, and then press
ENTER
.
• Use
s
or
w
to scroll through the modes: Audio, Photo
or Video. Press
ENTER
to enable/disable the selected
mode. Active mode appears ticked.
Note
: The option Filter is available only when the CD has
different types of files.
Picture slide show
• Use
s
or
w
to select a picture. A picture summary
(W=width, H=height) will appear on the right bottom of
the screen. Press
12
or
ENTER
: The selected picture
will be displayed on the TV screen, and then the rest
of the pictures of the selected file will be displayed in
slide show
Note
: You can select Repeat on the list on the right using
d
and then press
ENTER
repeatedly to select File repeat
mode.
Previous/next picture
• Press
7
or
8
to go to the next/previous picture.
Stopping Slideshow
• Press
12
to pause the slideshow. Press again to
resume slideshow.
• Press
3
to stop the slideshow.
Enlarging pictures
Pause the picture, then press
MENU/ZOOM
repeatedly to
enlarge the image as desired (x1, x2, x3). Use
s
,
w
,
a
and
d
to scroll through the enlarged image. Press
MENU/ZOOM
4
times to return to original size.
Rotating pictures
Pause the picture, then
s
,
w
,
a
and
d
to modify picture
orientation: 90°, 180°, 270°, return to original orientation.
Modifying picture scan
Pause the picture, then press
AUDIO/ANGLE
during 2
seconds to modify scan mode.
Reading a usb flash drive (not provided)
The device has a USB port to allow reading music files
(MP3) and images (JPEG) from a USB flash drive.
• Make sure no disc is currently being played.
• Connect the USB flash drive to the port.
• Press
SOURCE
, then choose USB using navigation
buttons, the press
ENTER
.
• USB flash drive files will be displayed on the screen.
Playback features are the same than for CDs. See the
paragraph for the type of file you want to read.
Note:
• You can change the mode
USB
to
DISC
and vice versa
by pressing
SOURCE
, only if no disc is being played.
• Do not remove the USB drive when files are being read,
as this might result in file damage.
• It is recommended to save USB content to prevent
data loss.
•
Warning
: Use 2 GB USB flash drives only. The player
does not support all USB devices (e.g. external hard
drive, etc…).
Downloaded From Disc-Player.com Thomson Manuals
