Connections and initial set up
3
EN
EN
Connecting: DVD TV set + VCR
If you are only connecting your player to your television set, only carry out the connections shown in stages 1
and 5. If no Scart-Peritel socket is available on the TV set consult your retailer. If you already have a VCR the
connections shown in stages 3 and 4 should, in most cases, already be in place.
Recommended Audio – Video connection
1.
Plug a Scart Peritel cable (not supplied) into TV AUDIO VIDEO out socket at the back of
your DVD player and into the AV1 in socket (sometimes also called AUX 1 or EXT 1) on
your TV set.
2.
Plug an AV cable (not supplied) into the VIDEO OUT socket on your DVD player and into
the VIDEO IN socket on your video recorder.
3.
Plug the outside aerial or the network into the aerial in socket (IN
) on the VCR.
4.
Use a coaxial cable to connect the aerial out socket on the VCR (OUT
) and the aerial in
socket (
) on your TV set.
5.
Plug the mains plug of your player into a mains socket.
Continue on page 5
The rear panel of your television set and your video player may be different from the ones illustrated here.
SERIAL N
°
CLASS 1
LASER PRODUCT
2
3
4
1
5
Television set
Video recorder
DTH 211
DTH211_EN_0210 11/02/03 11:34 Page 3
