Connections and Setup
10
EN
Manual installation
To complete the set-up of your video recorder when the automatic channel set-up has not stored
all the channels or when you wish to store a new channel.
1.
Turn on your television and your DVD/VCR. Select the AV channel on your television, press
the
VCR
button and then press to access the main menu.
2.
Press the
and
buttons to select
PR SET
then press
ok
.
3.
Press again and the television channel table appears.
4.
Use the
and
buttons to select the programme number you want to tune, then press
ok
.
5.
Select the
CH
section (if not already selected) by using the
and
buttons and then press
the
AV
key to select
C
(for channels received via your roof aerial) or
S
(for cable network
channels).
6.
Press
ok
and select the colour system of the channel by pressing the
and
buttons.
Press
ok
, and then use the
and
buttons to search for the channel of a programme.
7.
The station can be fine tuned to improve picture quality. Select
MFT
(Manual Fine Tuning)
using the
and
buttons. Use the
and
buttons to adjust the picture.
8.
Select
STATION
by pressing the
button. You can then name your station.
9.
Press
ok
to reveal the television channel name list.
Use the
and
buttons to choose a channel
name from the list. Press
ok
to select it.
10.
If the station name you require is not listed you can
insert one manually.Then press the
button. A
flashing bar appears beneath the first letter. Use the
and
buttons to select letters and numbers for
the new channel name up to a maximum of 5. Press
the
and
buttons to pass on to the previous or
next character. Press
ok
.
11.
Press to
confirm.
12.
Press again to remove the menu.
13.
The new channel is now stored into your video recorder.
If you wish to install manually other channels you should repeat the above procedure.
To sort the new channel, see “Sorting the channels” on page 9.
Note: If it is necessary for you to tune all the channels manually you may find it easier if you write the CH
numbers down for each station as you find them.You can then select each channel from the main menu and
type the CH numbers in directly. Each channel will then be in the correct position so there is no need to sort
them later.
PSET
R
PR
CH
MFT
06
00
C40
BORDE
ANGLI
ITV
BBC2
BBC1
CH TV
WEST
GRANA
i
OK
PSET
R
DTH6100U_EN 18/07/03 13:46 Page 10
