12
Connections and initial set up
Adding a channel
If you want to set up a new channel, use the manual search procedure which will enable you to add
a channel to the ones already set-up on your DVD recorder.The channels already stored will not be
deleted. During the initial installation, if you carried out the automatic installation described on page
6, you do not need to carry out the steps shown on 12 and 13.
1.
If the Main Menu is not displayed, press the
MENU
key.
2.
Select the
Setup
line using the
▲
or
▼
keys, and press
OK
to validate.
3.
Select the
Installation
line using the
▲
or
▼
keys, and press
OK
to validate.
4.
Select the
Manual Search
line using the
▲
or
▼
keys, and press
OK
to validate.
5.
Select your country of residence using the
▲
or
▼
keys, and press
OK
.
A set-up window will appear.The
Standard
line is highlighted.
6.
Select your country’s TV standard using the
B
.
Note: the standards displayed depend on the country selected in
step 5.
FRANCE (LL’)
for France,
EURO BG (BGH)
for Western Europe.
DKK’
for Eastern Europe.
I
for the United Kingdom.
7.
Select the
Reception
line using the
▲
or
▼
keys, and use the
B
key to choose the type of
antenna.
•
Reception through external antenna: select
Antenna (Ch)
.
•
Cable reception: select
Cable (Ca)
.
8.
Select the
Channel
line using the
▲
or
▼
keys.
9.
Press
PR+
to start the Manual search.
The search starts.When a channel is found, the picture appears in the background.The channel
number is indicated (e.g.:
Ch 06
).
If the channel is encoded, press
AV
to display the pictogram
next to the channel number. In
this case, plug a decoder into the blue AV2 connector of the DVD recorder.
If the picture is poor, select
Fine Tuning
using
▲
or
▼
and adjust with
PR+
or
PR-
.
10.
When the picture and sound of the channel are good, select the line
Save
using
▲
or
▼
, and
assign a channel number with
PR+
or
PR-
or the
number
keys. Press
OK
to store the
number that you have assigned to the channel.
The
Channel
line is once again highlighted to start a new search. Repeat the procedure from
step 9 to search for a new channel or press
MENU
to exit the manual set-up.
2_DTH8555 X_en.qxd 18/08/05 10:15 Page 12
