7
Connections and initial set up
Sorting the channels
11.
A window for classifying the channels appears with the images of the selected channel.
The automatic channel search has assigned numbers to the channels in a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.
Note: Channel sorting instructions:
Move: press
OK
(then the
C
,
B
,
▼
or
▲
keys until you reach
the desired position (Pr no. on the left of the list then
OK
:
swapping of the 2 channels).
Delete:
EXIT
key.
Rename:
INFO
key then in the grid,
C
,
B
,
▼
or
▲
keys to
choose a name letter by letter in the list. Validate by pressing
OK
.
Decoder adjustment:
AV
key (indicates that the images of the
selected channel will be decrypted by a decoder, of the
C
ANAL
+
type, connected to connector
AV2
. The symbol of a
decoder displayed alongside the name of the channel confirms
the adjustment).
12.
When all channels have been sorted to your liking, press the
STOP
key.
13.
Your DVD recorder has an automatic time (and date) setting function. In general, no setting is
required on your part. If the time and date information are correct, select
Done
by pressing
OK
several times. A message appears. It indicates that the installation of the channels are now
complete. Press
OK
.The main menu of your DVD recorder appears.
Clock setting
AutoClock:
If the time and date are incorrect, adjust the clock as described below, check that
automatic time updating is activated.The time setting of the DVD recorder is important for the
correct functioning of your programmed recordings.
1.
Select
Year
. Enter the year’s 4 digits (press
2
,
0
,
0
,
5
for 2005).
2.
Then enter the 4 digits of the date (press
1
,
5
,
0
,
5
for
15th May).
3.
Enter the 4 digits of the time
(press
1
,
1
,
0
,
6
for 11:06). Press
B
to display
Yes
for
the auto clock.
4.
Then press
twice
on
OK
.
The Main Menu will appear
again. Channel set-up is complete.
Note:You can now use your DVD recorder and take advantage of its numerous functions. If you want to
connect a satellite receiver to your DVD recorder, refer to page 14 for the recommended connection.You can
also complete your installation through the settings available in the
System Options
menu (refer to
pages 64-65). These adjustments depend on the other devices that you are likely to connect to your DVD
recorder.
If you want to redo the automatic channel set-up, you will have to select
Interactive setup
in the
Installation
menu (in the
Setup
menu).
EN
EN
2_DTH8555 X_en.qxd 18/08/05 10:15 Page 7
