73
EN
EN
Further information
You can’t access the selected menu, even when you press OK
• If the name of the menu appears on a transparent background, it means that the
corresponding menu or function is not available.The
Disc
,
Titles
,
Playlist
and
Card
menus are contextual menus: they depend on operations performed beforehand such as:
•
Disc
is only accessible if there is a disc in the disc tray of your DVD recorder.
•
Titles
is only accessible once you have recorded a TV program or video sequence (from
an external device).
•
Play list
is only accessible with a CD.
•
Card
is only accessible once you have connected a card reader to the front USB socket
and inserted a card in it.
Your DVD recorder menu disappears
• As with computers, your DVD recorder has a screen saver which replaces the fixed menu
by a mobile THOMSON logo. Press on a navigation key to bring back the fixed menu.
You can’t switch channels
• During the recording of a TV program (or video sequence from a connected device),
switching channels is impossible.To change channels, you have to stop the recording
completely (page 29).
In quiet moments, you hear a slight hum coming from your DVD recorder
• Your DVD recorder is equipped with a fan. It releases heat in order to ensure proper
cooling. It switches on as soon as your DVD recorder is turned on and produces a slight
hum.
The TV guide (NAVICLICK) is not displayed
• Downloading may be disabled. Make sure that
Off
is not ticked (page 66).
• Does the channel broadcast a TV guide ? Check in the list on page 67.
Other problems
Reconfiguring your player’s initial set-up
• Open the disc tray and make sure there is no disc in it. Close the disc tray. Hold down the
STOP
key of your DVD recorder, then press the
ON/STANDBY
key by holding it down
for 3 seconds, until
INIT
is displayed on the screen of your DVD recorder.When
MENU
reappears on your display, turn off and then turn on your DVD recorder using the
ON/STANDBY
button on the front.The menu displayed on-screen is the menu which
enables you to choose your DVD recorder’s display language. It confirms that all settings
made since initial installation have been deleted.The DVD recorder has been reconfigured
as it was when purchased (factory settings). Refer to page 5 of this manual to restart the
installation of your DVD recorder.
If you forget your password
• Open the player’s disc tray and ensure that there is no disc on it. Close the tray.The
player menu is now displayed on the TV screen. Now press the
STOP
key on your player
and hold the
STOP
key on the remote control unit down for 3 seconds.The password
that you chose for parental control is cancelled.To reallocate a code see page 62.
2_DTH8555 X_en.qxd 18/08/05 10:15 Page 73
