background image

9

Operation

EN

O

Adjusting the sound

Display the 

OVERVIEW menu by pressing the 

MENU

button. Select the 

Sound option and press 

OK

to confirm.

The 

SOUND menu appears with the following options:

Equaliser: this option gives access to the graphic equaliser (see below).

Sound type: this option is used to select the appropriate sound type.

Note: the options available depend on the programme you are watching.

The table on this page indicates the sound types available for each type of
broadcast.

Balance: use this setting to balance the sound between the right and left
speakers.

Auto Vol Level: this function softens loud sound effects. It is particularly useful when you are watching television late at
night, for instance.
Check the box to enable this setting by pressing 

OK

.

Press 

EXIT

to close the menu. Select the option 

Return and press 

OK

to return to the 

OVERVIEW menu.

: Enhanced stereo

Mono+ : pseudo-stereo 

Graphic equaliser

Select 

Equaliser

from the 

SOUND

menu and press 

OK

to display the menu.

This menu is used to select a preset parameter and define your own settings
using the graphic equaliser.

It offers the following options:

Preset

: use the 

buttons to select the appropriate setting for the

programme you are watching.
The 

Personal

setting stores your graphic equaliser settings.

You can access the list of preset sound settings directly by pressing the 

PRESETS

button (red) on the remote control, selecting the

Preset

option and choosing one of the preset parameters from the list.Your selection is applied to all channels and AV programmes.

Freq. range

: the graphic equaliser has five frequency bands. Select each band in turn using the 

buttons and make the necessary

adjustments using the 

buttons. Press 

OK

to confirm.

Note: When you are setting the graphical equaliser,

Personal

appears under the 

Preset

option.

Press 

EXIT

to close the menu.To return to the 

SOUND

menu, select 

Return

and press 

OK

to confirm.

Broadcast

Options

Mono

Auto, Mono

Nicam mono

Nicam, Mono

Nicam / IRT stereo

Stereo, , Mono, Mono+

Bilingual Nicam

S1, S2, S3

Bilingual IRT

S1, S2

AV

Stereo, S1, S2

SOUND

Return
Equaliser
Sound type

Stereo...

Balance
Auto Vol Level

GRAPHIC EQUALISER 

Return
Preset

Personal

Freq. range

8 kHz

06-EFC030-EN.qxd  15/06/05  13:40  Page 9

Summary of Contents for EFC030
















Reviews: