182
Kalypso Reference Manual
Section 3 — Menus
Source Memory Operation Rule Changes
Starting with Kalypso software version 10.0 the following rules for Source
Memory Operations apply:
•
While Source Memory is active, if it is loaded or copied or swapped, the
new Source Memory will be immediately applied to the Current Work
Buffer.
•
While Source Memory is active, Source Memory will immediately be
updated to reflect changes to the Current Work Buffer.
•
When Source Memory is activated after having been inactive, the
Current Work Buffer values will not be immediately updated to reflect
the Source Memory. However, reselecting the same source on a bus will
pull Source Memory into the Current Work Buffer.
