206
Kalypso Reference Manual
Section 3 — Menus
Output Assignments Menu
The Eng Setups Output Assignments menu is used to assign Kalypso
system outputs to specific physical connectors on the rear of the Video Pro-
cessor frame. The menu is accessed by touching
Eng Setup
,
Outputs
(
Figure 133. Output Assignments Menu
Eight data pads at a time are displayed in the left Physical Outputs area.
Each data pad is associated with a specific pair of physical output connec-
tors on the frame. Touching a data pad selects it, colors it gold, and the rest
of the screen will show information and settings for only the selected item.
On the right Output Sources scrolling window, sixteen touch button output
sources at a time are displayed. Scrolling and selecting one of these touch
buttons assigns that signal to the selected output connector.
The Output Name touch pad brings up an alphanumeric keypad for typing
in a name for the selected output.
See Section 3 - Configuration of the separate Kalypso Installation and Service
Manual for specific configuration instructions.