348
Kalypso Reference Manual
Section 3 — Menus
The Color Corrector Transfer Function pane contains three data boxes
which serve as delegators. Each of these data boxes contains the Gain, Lift,
and Gamma values. The three oscilloscopes show the input to output
transfer characteristics of each color component's processor. They do not
show actual video.
The Knob Mode pane has three buttons, the first two,
Gain/Lift
and
White/Black
, determine the mode for the knobs and the text boxes in the
Color Corrector Transfer Function pane. When the third button,
Reset to
Unity
, is touched it resets all values for the selected component to the
If
Gain/Lift
is selected the knobs and boxes will appear as in
If
White/Black
is selected (see
), the following changes occur in the
menu:
•
The gain and offset are expressed in the oscilloscope in terms of the two
end points of the transfer function without regard to where the scope
trace would clip,
•
Gain is changed to White,
•
Lift is changed to Black, and
•
Text boxes show the values for White and Black.
Figure 240. Color Corrector Menu in White/Black Mode
