Kalypso Reference Manual
349
M/E Menus
The value ranges are shown in
When one of the
Red
,
Green
, or
Blue
color component's data box is selected,
the knobs for
Gain
,
Lift
, and
Gamma
are delegated and re-labeled for the spe-
cific component. In
, the Blue data box has been selected, so the
knobs are labeled
Blue Gain
,
Blue Lift
, and
Blue Gamma
, and they control those
values. If the Green data box had been selected, the knobs would be labeled
Green Gain
,
Green Lift
, and
Green Gamma
and would control the green channel's
values, and similarly for Red. The border color for the oscilloscope for the
selected component is changed from black to white.
Figure 241. Adjustments
The three color components have individual
On
buttons, which are LED
push on/push off type buttons. As shown in
components have been enabled but the Green component has not. If a com-
Table 13. Color Corrector Value Ranges
Control
Minimum
Maximum
Nominal
Units
Gain
0
200
100
%
Lift -40 +100 0 IRE
Gamma -100 +100
0
%
Black -40 +100 0 IRE
White -40 +300 100 IRE
