68
Kalypso Reference Manual
Section 2 — Control Panels
Figure 48. 4-M/E Kalypso System Source Selectors on Main Panel, Left Side
Pressing a button on an M/E row selects the source mapped to that button
on the controlled bus, and the source button will go high tally if on-air, or
low tally if not. Of 128 available sources, up to 32 can be mapped to the
unshifted source selection buttons, and 32 to those shifted buttons. The
remaining 56 available sources can be selected via an E-MEM recall or
using the Source Select menu. The reentry buttons are fixed and cannot be
mapped.
Only one source at a time can be selected for each bus on the row of inter-
locked buttons. The left source will be selected if more than one button on
a row is pressed simultaneously.
Holding down a source select button when recalling an E-MEM register
performs a source override. That source will be held on that bus even if a
register is recalled and/or run that specifies a different source.
Note
Different types of control are available for choosing which sources are
subject to change during a Recall: Source Override (
U1
A
U2
B
K4
K2
K3
K1
M/E
1
0618_00_04_r6
K4
K2
K3
K1
K4
K2
K3
K1
U1
A
U1
A
U2
B
U2
B
M/E
1
Black
NetWk
East
Feed
Cam
1
Cam
2
Cam
3
CG
8
7
32 Buttons
Per Row
Key
Source
Select
Buttons
(2 Rows)
Background
Source
Select
Buttons
(2 Rows)
Source Name
Display
Source
Selection
(4)
