74
Kalypso Reference Manual
Section 2 — Control Panels
M/E Status Displays
Each M/E has an M/E Status display that reports the current state of that
M/E. The M/E status display has Keyer, Background, and Transition sec-
tions, and has a Lever Arm Bar graph (
Figure 51. M/E Status Display Information
M/E Status Information
The M/E Status Display shows information for all four keyers (K1 - K4)
and all four background buses (A, B, U 1 and U 2). The following informa-
tion is displayed for each keyer and background:
•
The buses currently being controlled by that M/E’s source select
buttons are indicated by triangles on the left side of the display.
•
The current shift preference is shown with a down or up arrow. Up
arrow indicates a shifted preference, and down arrow indicates an
unshifted preference.
•
Source Hold, Keyer Hold, or Bus Lock is active.
•
Internal Transform Loop or External DPM Loop indicator.
•
The M/E Partitioning assignment (to Pri or Sec).
•
Uncal indicator (Proc amp is active and not set to unity).
0618_02_75_r1
ON
A SEL
1
K HOLD XFORM
F - LIN
BUG
S HOLD XFORM
S HOLD
PROG
CF
K
3
K
4
U
1
U
2
K
1
K
2
A
K
3
K
4
EFX
K
1
K
2
B
CAMERA 3
M/E 3 SEC
M/E 3 PRI
SS 2
ON
INV
S HOLD
A SEL
F - LIN
MATTE
MASK
15:00
UNCAL
UNCAL
3
2
4
XFORM
S HOLD
PRI
FONT 2
DDR 4A
FOX BOX
DDR 4B
V SEL
A - LIN
MASK
A SEL
F - LIN
MASK
M/E Status Displays (4)
Keyer
Section
Background
Section
Transition
Section
M/E
Mode
Auto
Trans
Rate
Controlled
Bus
Indicator
Shift
Preference
Indicator
Source
Name
Key
Priority
(1-4)
Lever Arm
Progress
Bar
Key Cut
Name
(If Split)
