258
Kalypso Reference Manual
Section 3 — Menus
GPI Out Deterministic Triggers
Kalypso version 10.1 adds a one field delay for GPI Out triggers to improve
the deterministic behavior of E-MEM effects containing these triggers.
Note
Any E-MEM effects built with earlier software versions that rely on determin-
istic timing of GPI or PBus triggers will need to be tested and probably
adjusted. The adjustment involves moving triggers one field earlier in the
timeline. For example, if a trigger is in a key frame at 1:00, insert a new key
frame for just the GPI or PBus trigger at 0:29.1 and remove the trigger from
the key frame at 1:00.
PBus & GPI Out Enables Menu
The PBus GPI Out Enables menu is used to enable or disable command
capabilities for PBus devices (in the left pane) or the Kalypso system GPI
outputs (in the right pane). The menu is reached by touching
PBus & GPI
,
Enables
Touching the button for a device or GPI toggles the enable on or off. Items
that are disabled will not fire, even when programmed to do so by an effect.
Figure 175. PBus GPI Enables Menu
The
Enable All
and
Disable All
buttons allow enabling or disabling all enables
for PBus or GPI Out.
