Kalypso Reference Manual
271
E-MEM Menus
Source Holds Menu
The Source Holds menu is used to program holds into E-MEM effects. The
menu is accessed by touching
E-MEM
,
Source Holds
(
Figure 184. Source Holds Menu
During E-MEM recalls and effect runs sources can be programmed to
change. Sometimes this is not desired, as an effect may be designed to run
on the currently selected sources, not the particular sources used when the
effect was built.
Note
Different types of control are available for choosing which sources are
subject to change during a Recall: Source Override (
(
), and Source Hold (
).
Only Source Hold, controlled from this menu, is keyframeable. The others
are panel states not controlled by the E-MEM system. A hold is imposed
whenever one or more type of hold is in force.
Path Control Access
The Path category selection button at the bottom of the menu provides
access to the Interpolation Paths menu (see
). This menu provides
controls over interpolation between keyframes.
