314
Kalypso Reference Manual
Section 3 — Menus
Offset
— positions the page turn cylinder with respect to the source
plane and, when interpolated between keyframes, causes the page to
turn. The offset would typically change from one edge or corner of the
source raster to the opposite edge or corner for the turn.
Base Opacity
— defines opacity of the original plane.
Fold Opacity
— defines opacity of the cylinder and final plane.
Show Sides Pane
Choices of what sides of the effect to display (
Both
,
Front
,
Back
) are available
in the Show Sides pane. Selecting only a portion of the effect can be used
for multi-pass effect creation.
When
Back is Matte
is selected, the back of the effect will be a matte color. The
color of the matte can be changed by touching the Back Color data pad to
bring up soft knob controls for Hue, Saturation, and Brightness.
Split Axis Pane
Split page turn and roll effects are controlled with the Split Axis pane. The
effect can be split
Horiz
, or
Vert
, or both ways using the labeled buttons.
Selecting the Split Axis Pos data pad brings up Horiz and Vert soft knobs
that control the location of the split.
