Kalypso Reference Manual
357
Wipe Menus
Wipe Menus
The Wipe menus like the Keyer menus, have a delegation area at upper left,
which in this case contains pattern touch pads for every wipe pattern gen-
erator point of use. The currently selected shape is displayed on these touch
pads.
Point of Use Menu
The Wipe Point of Use menu in
has been delegated to control
Pgm Pst PW1 (corresponding to the Pgm Pst primary partition
Wipe 1
Tran-
sition subpanel button). The lower left Pgm Pst PW 1 touch pad has also
been selected (it is colored gold). This displays a Point of Use parameter
area on the right. A point of use is the location where a wipe pattern will be
used, corresponding to one of the keyers or background transitions. The
controls in the Point of use pane affect each point of use of that wipe pattern
separately. This allows applying different settings to the same pattern used
at different places in the system. The controls in the other panes in this
menu affect the pattern generator itself. Pattern generator adjustments will
affect all points of use employing that generator's pattern. The upper left
delegation area identifies the generator connected to each point of use in
gold text as well as the pattern selected on that generator.
Figure 248. Point of Use Menu
