Kalypso Reference Manual
379
Menu Organization
Clip
and
Gain
adjust the associated parameters for the delegated keyer. These
knobs appear in both pages of this menu. The Clip and Gain control labels
change to
Clip Hi
and
Clip Low
if the delegated keyer type uses that control
methodology.
Pos
,
Size
, and
Opacity
adjust the associated parameters for the delegated
keyer. These knobs appear in both pages of this menu.
CK Adj
leads to the Chroma Key Adjust menus.
B’Line
leads to the borderline
menu,
ES Sel
leads to the Effect Send Select menu.
AutoSet
is only active if the key type is set to chroma key. Pressing it activates
chroma key auto setup, and the button lights while it is active. The joystick
becomes delegated to locating the color pick cursor on the switched
preview monitor, and pressing the button on top takes the sample. Pressing
AutoSet
before a sample is taken cancels the autosetup leaving the chroma
key unaffected.
Pressing
Cur Pri
will lead to the Key Priority menu in such a way that the
current priority stack is adjusted.
NxtPri
leads to the same (or similar menu)
in such a way that the next priority stack is adjusted.
EffSend
is an on/off button for the Effects Send loop. This button by default
selects an internal transform engine.
ShowKey
is an on/off button for the show keyer (on preview output) func-
tion.
Chroma Key Adjust Menus
Press the
Ck Adj
↓
↓
↓
↓
button to access the Chroma Key Adjust menu. This menu
has four pages. Pressing
More
cycles through them.
Figure 278.
Pri Hue
Pri Sel
PriCsup
PriLsup
Sec Sup
ReShape
ShowKey
FG Only
AutoSet
Figure 279.
Clip Hi Clip Low
Pos
Size
Opacity
Sec Sup
ReShape
ShowKey
FG Only
AutoSet
Figure 280.
Sec Hue
Sec Sel
SecCsup
SecLsup
Sec Ang
Sec Sup
ReShape
ShowKey
FG Only
AutoSet
