THOMSON HT151SB, Manual

23

EN

HOME THEATER

HT151SB

RADIO

Manual setting

• Connect the FM antenna to the back of the device.

• Press 

SCART/FM

 in the remote control or 

SOURCE

 in 

the front panel to pass to the 

TUNER

 mode.

• Select a radio station and press 

5

 or 

6

 to search for 

the desired station.

• Press and hold these keys for about two seconds to 

start the automated search.

Radio station storage.

The device can store 30 radio stations. You can enter the 

radio station or the device can store all the radio stations 

automatically in an ascending order.

Default Automatic Programming.

• Press 

SCART/FM

 to pass in 

TUNER

 mode.

• Press 

MEMORY

 for two seconds to start the automatic 

research.

• The device scan the radio frequency and automatically 

store the radio stations. When all the available radio 

stations are stored or the 30 memory sites are full, the 

automatic programming stops.

Manual selection 

• Select a radio station (see “ Manual settings” for more 

information).

• Press 

MEMORY

: the number of preset program flashes.

• Using the keypad, select the desired program number, 

and then press 

MEMORY

 to confirm the selection.

Station recovery

• Press 

SCART/FM

 to enter in 

TUNER

 mode.

• Press 

PRESET/

7 

or 

PRESET/

8

 to search the stations 

or press the numerical keys directly.

Advice:

• When the FM station broadcasts a found stereo sound, 

ST is displayed.

• When you manually adjust a reliable FM station, press 

AUDIO

 in the remote control to pass from stereo to 

mono mode. This could help you to reduce background 

noise.

• If there is interference, change the position of the 

antenna to obtain good reception. TV and other 

electronic devices could cause interferences.

• A low level signal can affect the effectiveness of the 

«Automatic station programming».

Note:

Adjust the antenna to obtain good reception and an 

effective search.

After use, we recommend you turn the device off.

• Supported media types: CD, CD-R/RW, DVD, DVD-R/

RW, DVD+R/RW.

• Supported media formats: Audio CD, Video CD, Super 

Video CD, HDCD, Kodak Photo CD, DVD.

• Supported codecs: DivX ,XVID, MPEG1, MPEG2, 

MPEG4, MP3(VBR), JPEG, Photo CD.

• Software: Possible update

• Pass-band: 20Hz-20 kHz

• Radio audio S/N : >90dB 

• THD: 10% 

• DAC Audio: 96Khz/24 bit Audio D/A Converter.

• DAC Video: Four pair 12 bit 148 MHz Video D/A 

Converter. 

• Video resolution: 520 lines or more HDMI out which  

576p/720p/1080p output

• Ratio Video S/N: 56dB.

• Audio output (Analogical): Electrical output level: 2V, 

resistance: 10 KOhms.

• Video output: Electrical output level 1Vp-p, resistance: 

75 ohms not balanced negative.

• Power supply: 230-240V ~ 50/60Hz

• Consumption: 100 W

• Total musical power: 650 max 15W

Attention

: updates to the manufacturer’s software must be 

certified by an authorised agent.

Updating the software yourself can cause the appliance to 

malfunction.

TECHNICAL SPECIFICATIONS

USE

Note

: Unit design and specifications are subject to change 

without notice. The manufacturer reserves the right to make 

the necessary improvements.