EN
25
2
2 / USING YOUR APPLIANCE
POWERING ON
Press the start/stop button for the cooking
zone you want to use. A flashing 0 and a bip
indicate that the cooking zone is on. You can
then choose the desired power level.
If you do not select a power level, the cooking
zone will automatically turn itself off.
STOP
Press the start/stop button for the cooking
zone used or the power "
--
" button until 0
0 is
displayed.
ADJUSTING THE POWER
Press the + or - power buttons. During opera-
tion, you can set the power level to “12”
directly by pressing the “—
—” button
Pre-selected power levels:
Button Low-heat
(6
6)
Button
High-heat (1
10
0)
Button Boost
boiling
•
•
•
•
DESCRIPTION OF THE CONTROL
PANEL
•
•
Start/stop touch control.
Power - + touch controls.
Power - + touch controls.
A
B
C
Tip
For simultaneous use, favour the use
of cooking zones located on opposite
sides of the hob.
On the same side, the use of a cooking
zone at maximum power results in an auto-
matic limitation of the other cooking zone
on that side, which is indicated in the power
level display.
SETTING THE TIMERS
Each cooking zone has its own timer. It can
be used as soon as the cooking zone is tur-
ned on.
To turn it on or change the timing, press the
“+“ or “-” buttons on the timer.
When setting longer cooking times, you can
get to 99 very quickly by pressing the “-” but-
ton straight away.
When the cooking is finished, “0” is displayed
and a beep sounds. To cancel this informa-
tion, press any button for the particular coo-
king zone being used. Otherwise, the infor-
mation will disappear after a few moments.
To stop the timer manually, press “+” and “-”
at the same time or return to 0 using the
“-” button.
•
•
BOOSTER
A
B
C
Summary of Contents for IKT657
Page 47: ...47 ...
Page 48: ...48 99644991 12 07 ...
