Selecting Tuner Band
1. Press
SOURCE
to select TUNER.
2. Press
BAND
to select radio band.
Tuning to a Station
Press
SKIP BACKWARD
or
SKIP FORWARD
to select frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press
TUNE•PRESET
to toggle TUNE and
PRESET mode.
• Press
SKIP BACKWARD
or
SKIP
FORWARD
on the main system or
PRESET
UP
or
DOWN
on the remote control to access
the previous or next preset station. The display
first shows the preset program number and
after a few seconds, the frequency will be
displayed. (FMPR:01 is FM preset 1)
Auto Preset Programming
(FM only)
Press and hold the
BAND
button for 2 seconds to
scan stations in FM band. The stations will then
be stored as preset channels. A maximum of 32
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button. You can stop the automatic
scan by pressing any button, but the erased sta-
tions cannot be recovered.
Manually Setting Presets
1. Press the
TUNE•PRESET
button to enter TUNE
mode.
2. Press
SKIP BACKWARD
or
SKIP
FORWARD
to access the desired
frequency.
3. Press the
PROG•SET
button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press
SKIP BACKWARD
or
SKIP
FORWARD
to move to the desired preset
number (1-32).
6. Press
PROG•SET
to store the selected
frequency at that preset.
Suppressing Stereo Signal
Press
FM ST.
to toggle between FM mono and
stereo for stereo FM stations. (Remote Only)
9
EN
Radio
Tips:
Your audio system has 32 preset stations.
87.50 MH
z
PR:01
MS2200 EN 11/17/03 1:59 PM Page 14
