background image

CR29TF420
FEB/02

CR29TF420

Television

Latin America After Sales

Indianapolis,  IN  46290  U.S.A.

SERVICE DATA INDEX

USE ISOLATION TRANSFORMER WHEN SERVICING

SAFETY NOTICE

Components having special safety characteristics are identified by a (    ) on schematics and on the parts list in this Service Data and its bulletins.
Before servicing this instrument, it is important that the service technician read and follow the "Safety Precautions" in the Basic Service Data.

CR29TF420

Basic Service Data

First Edition - First Printing
Copyright 2002 - Thomson multimedia Inc.
Printed in U.S.A. - Trademark(s)

®

 Registered - Marca(s) Registrada(s)

Page

Number

Adjustments (Onscreen Display) ...................................................................................

9

Circuit Decription ...........................................................................................................

21

Disassembly ...................................................................................................................

5

IC Pin Descriptions ........................................................................................................

15

Remote Control ..............................................................................................................

14

Replacement Partlist .......................................................................................................

37

Schematics

Interconnect Diagram ..................................................................................................

46

AV Switch ..................................................................................................................

47

Micro-Controller ........................................................................................................

48

One Chip ....................................................................................................................

49

Power Supply .............................................................................................................

50

Stereo Decoder and Audio Output .............................................................................

51

Tuner ..........................................................................................................................

52

Vertical and Horizontal Output ..................................................................................

53

Video Output ..............................................................................................................

54

Servicing and Safety Checks ...........................................................................................

2

Specifications ..................................................................................................................

3

Troubleshooting Guides .................................................................................................

24

Waveforms ......................................................................................................................

32

CAUTION: Modification or repair of this unit by unauthorized persons is a direct violation of FCC Rules Part 68.216 and could

result in risk of electric shock.  You are urged to contact a qualified factory authorized service facility for repairs.

A-PDF MERGER DEMO

Summary of Contents for RCA CR29TF420























































Reviews: