E-DOC-CTC-20060911-0057 v1.0
Chapter 2
Basic Installation
17
Starting the Easy Setup wizard
You can also start the Easy Setup wizard from within the embedded Web pages. Proceed as follows:
1
Browse to the Thomson Gateway pages on
by
default).
2
In the menu, click
SpeedTouch
.
3
In the
Pick a task
list, click
Set Up
.
Using Easy Setup
In the Easy Setup wizard:
1
Click
Next
to proceed. If for some reason you want to abort the wizard, click
Cancel
.
2
Choose the
Service
provided by your ISP (Router or Bridge) and click
Next
.
3
Select the appropriate
VPI/VCI -
and, if required, the
Connection Type
(PPPoE or PPPoA)
-
provided by
your ISP, and then click
Next
.
4
For a Routed service, fill in the Internet Account settings (
PPP user name
and
password)
provided by your
ISP, and then click
Next
.
5
Fill in a
Security user name
and
Password
for your Thomson Gateway.
6
In the next window you can review your settings, before starting the configuration of your Thomson
Gateway. If something is missing or incorrect, click
Back
. To confirm your settings, click
Start
.
7
Wait until the configuration is finished, and then click
Finish.
i
The factory default user is ‘Administrator’ and its password is blank. It is advisable to specify
another Administrator user name and password to protect your Thomson Gateway from
security violation, as described in
Summary of Contents for ST716v5
