~ 20 ~
User Manual
TROUBLESHOOTING GUIDE
SYMPTOMS AND CORRECTION
Symptom
Correction
No power
●Connect the power plug into wall outlet securely
No picture
●Verify the connection from the DVD video outpu
t to the TV
video input. Then switch TV to appropriate mode (video 1)
● Connect the video cable into the jacks securely. Refer to your
television owner’s manual.
No sound
●Connect the audio cable into the jacks securely.
●Verify the connection from the DV
D audio output to the TV or
receiver audio input. Then switch to the appropriate source on
the receiver. Refer to your audio amplifier owner’s manual.
Black & White picture
●Damaged S
-Video connector (bent pin)
The playback picture
has occasional
distortion:
●A small amount of picture distortion may appear because of
a poor quality video/sound transfer to disc. This is especially
true of some discs manufactured between 1997 -1998.
●Scratched disc.
Brightness is
unstable or noises
are produced on
playback picture
●Connect the DVD player directly through the TV and not
through other source. What you are viewing is the effect of the
copy protection circuitry required on all DVD players.
●If do not have a video input on your TV, you must purchase an
adapter from your dealer
The DVD video
player does not start
playback
•Place the disc with the graphic side up.
•Place the disc on the disc tray correctly inside the guide.
•Make sure the disc is free from scratches & fingerprint.
•Cancel the parental lock funct
ion or change the parental lock
level.
•Turn the power off then disconnect the power plug and reinsert
it back into the wall outlet
The remote control
does not work
properly
●Replace the batteries with new ones
This unit can play multiformats files.
In USB mode, some formats can not be supported (such as HDMP4 for ex) when you enter
DVD Menu using DVD/ESB button on remote control.
In that case, please use MENU button on your remote control to display the 3 icons
MUSIC/PHOTO/MOVIE, then enter into your USB key to see your files.
This is not a dysfunction.
