2
IMPORTANT SAFETY INSTRUCTIONS
• Follow strictly the instructions in this instruction book and keep it in a safe place for
future reference. It contains important information about installation, use and safety.
• It is important to keep this booklet for future reference at any time: in the case of sale,
cession or move, make sure it is kept together with the product.
• The manufacturer declines all responsibility, for any eventual inconveniences, damages
or fires caused by not complying with the instructions in this manual.
• Use work gloves for all installation, cleaning or maintenance operation.
• The hood can have different aesthetic configurations with respect to what is illustrated in
the drawings of this manual, however the instructions for use, maintenance and
installation remain the same.
• Do not carry out electrical or mechanical modifications to the product or the exhaust
ducts.
• Before installing the appliance, check that there is no damaged component. Otherwise,
contact your dealer and do not continue the installation.
Note: the elements marked with the symbol ‘(*)’ are optional accessories that are
supplied only with some models or parts not supplied that must be purchased.
• Before performing any cleaning or maintenance, disconnect the hood from the mains by
unplugging it or turning off the main switch of the house.
• The hood must be regularly cleaned both inside and outside (AT LEAST ONCE A MONTH);
this should be done in accordance with the maintenance instructions.
• The use of an open flame is damaging to the filters and may cause fire, therefore they
should be avoided under any circumstances.
• Frying foods must be done carefully to ensure that the cooking oil does not catch fire.
• When the hob is in use, accessible parts of the hood may become very hot.
• Do not connect the appliance to the mains until the installation is completely finished.
Regarding the technical and safety measures to be taken for the evacuation of fumes,
strictly observe the provisions of local regulations. The air should not be sent into a duct
used to evacuate fumes from appliances using gas or another fuel.
• Do not use or leave the hood without the bulbs correctly mounted because a potential
risk of electric shock is possible. To replace the lamp, use only the type specified in the
lamp replacement/lamp maintenance section of this manual. Do not touch the bulbs
after using the appliance, you may get burned.
• Never use the hood without the grill mounted properly!
• The hood must NEVER be used as a support surface unless specifically indicated. Never
use the hood as a work plan.
• Use only the screws provided with the product for installation, or, if not included,
purchase the correct type of screws.
• Use the correct length for the screws that are identified in the Installation Guide. If in
doubt, consult your authorized service centre or qualified personnel.
• Failure to install the screws and fasteners in accordance with the instructions may cause
electrical hazards.
• Do not start using a programmer, a timer or a separate remote control system or any
other device that turns the power on automatically.
• Do not attempt to examine the filters while the hood is operating. The presence of open
flames can damage the filters and result in fire, so avoid them at all costs.