basICoPEraTIons
P11
English
5.6systemsetting
Press
mEnu
and select
System
. The menu provides options to adjust the system settings.
Press
pq
to select an option and press
tu
to adjust the setting. Press
EXIT
to exit
the menu.
Parentalguidance
You can restrict access to programs that are unsuitable for children below the set age. To
restrict/lock the channel you will need to enter either the default password '8888' or your own
password. This function depends from broadcaster. It will work only if broadcaster assigns
morality levels to the programs according to standards.
setPassword
Set or change the password for locked programs and menu access. Enter your old password
or the default password '8888'. You will then be asked to enter your new password. To confirm
re-enter your new password. Once it is confirmed, press
EXIT
to exit the menu.
restorefactorydefault
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select
Restore Factory Default
and press
oK
or
u
to select. Enter your
password or the default password ‘8888’ and press
oK
to confirm. This option will delete all
preset channels and settings. The receiver will reboots and start with Installation Guide menu.
Information
View model, hardware and software information.
softwareupdate
If the status is set
ON
, it will scan every day at specified Start Time for the new software
from broadcast.
softwareupdatefromusb
Download the required update file for your receiver model from our website www.thomsonstb.
net support page or contact to your local dealer.
Unzip file, if necessary, and copy it to root folder of your USB storage device.
Connect USB storage device to the USB port of the receiver. Enter to the main Menu, select
USB. Select
Multimedia
–
Music
and press
oK
. In the file list select file with software image
and press
oK
to start software update. Update process will take some time. Once update is
completed the receiver will display message “Update completed. Please restart”. Switch
OFF
main power and switch it back
ON
.
WarnIng:
Do not power off your receiver during update process and flashing data. Do not unplug
the USB device during update. This may cause damage of the data in the flash memory and the receiver will
need to be repaired.
5.7usb
Press
mEnu
and select
USB
. The menu provides options to playback music, photo, movies
and recorded files. Supported are MP3, WMA, JPEG, BMP files. The unit supports USB
devices with FAT and FAT32 file systems.
