76
EN
6e
PAUSE
PLAY
DISPLAY
A.DUB
STOP
USING THE REMOTE CONTROL UNIT
(cont.)
Audio Dubbing
The audio track can be customized only when recorded in
the 12-bit mode (
pg. 27).
NOTES:
●
Audio Dubbing is not possible on a tape recorded in 16-
bit audio, on a tape recorded in the LP mode or on a
blank portion of a tape.
●
To perform Audio Dubbing while watching on the
television, make connections (
pg. 56).
1
Play back the tape to locate the point where editing
will start, then press
PAUSE
(
6
).
2
While holding
A.DUB
(
e
) on the remote control,
press
PAUSE
(
6
). “
6e
” appears.
3
Press
PLAY
(
4
) , then begin “narrating”.
Speak into the microphone.
•To pause dubbing, press
PAUSE
(
6
).
4
To end Audio Dubbing, press
PAUSE
(
6
), then
STOP
(
5
).
To hear the dubbed sound during playback . . .
.... set “12BIT MODE” to “SOUND 2” or “MIX” in the
Menu Screen (
pg. 41, 42).
NOTES:
●
Audio dubbing is also possible using an optional
microphone connected to the MIC connector on the
Docking Station.
●
Sound is not heard from the speaker during Audio
Dubbing. To hear sound, connect optional headphones
to the AV OUT connector.
●
While an optional microphone is connected, the built-in
microphone is disabled.
●
When editing onto a tape that was recorded at 12-bit,
the old and new soundtracks are recorded separately.
●
If you dub onto a blank space on the tape, the sound
may be disrupted. Make sure you only edit recorded
areas.
●
If feedback or howling occurs during TV playback, move
the camcorder’s microphone away from the TV, or turn
down the TV’s volume.
●
If you change from 12-bit to 16-bit in mid-recording and
then use the tape for Audio Dubbing, it is not effective
from the point where 16-bit recording began.
●
During Audio Dubbing, when the tape moves to scenes
recorded in the LP mode, scenes recorded in 16-bit
audio or a blank portion, Audio Dubbing stops
(
pg. 91).
●
To perform Audio Dubbing with a video unit connected
to the camcorder’s AV connector, first set “AV/S-VIDEO”
to “IN” in the Menu Screen
(
pg. 41). You can hear sound from the video unit
using optional headphones.
Speaker
Audio Dub
Standby mode
POWER Switch
Display
AV OUT
(headphone)
connector
Stereo microphone
Remote sensor
External
microphone
input connector
Located
beneath
the cover.
Lock Button
VMD22 EN(66/100)
29/08/00, 15:47
76
