GB
9
You will obtain the best results from your Video Sender by adjusting the little
dishes (A) correctly. However, certain reflections or other forms of interference
may affect optimum signal transmission. If this is the case, either readjust the
position of the dishes or move the transmitter and receiver slightly until perfect
reception is obtained.
VID
EO IN
AUD
IO IN
DC
on off
of
f
on
If no picture is obtained,
check that the transmitter and the receiver have not been installed in the reverse
order (each unit corresponds either to the input or to the output of the Audio-
Video signal). Check that they have been properly connected and that they are
switched on (on position). Ensure that the channel selector is set to the same
letter on both units.
If transmission is blurred or scrambled
choose another channel but make sure that it is identical on both units.
VS5
30
vide
o tr
ans
mit
ter
CHA
NNE
L
Improvement of picture and sound
Transmitter
Receiver
VS530C 24/10/00 9:56 Page 9
