Audio Dubbing
☺
The audio dubbing enables you to replace the recorded sound on the mono track of a VHS tape
whilst keeping the recorded sound on the HiFi tracks.
A unit connected to sockets AV1, AV2, AV3 or AV4 may be used to dub your recordings.
1
Rewind the cassette to the start of the sequence to be dubbed and pause the picture using
the PAUSE (
28
) key.
2
Press the AV key on the remote control (
23
) or AUDIO DUBBING on the front of the
video recorder to activate the dubbing function.
3
Select the connected unit (Au3 for white, red and yellow cinch sockets on the front of
the video recorder; Au1, Au2 or Au4 for the sockets at the back of the unit) to monitor
the sound.
4
Press PLAY (
25
) to start dubbing, PAUSE (
28
) to interrupt the dubbing and STOP
(
27
) to stop.
Insert editing
☺
Thanks to Insert editing, you can replace part of an existing recording precisely without disturbance
at the edit points.
It is possible to insert from another video recorder, from a camcorder, or from another unit (TV set,
another video recorder).
1
Load the cassette and press STATUS (
6
) key.
2
Select unit or source of the sequence which is to be placed on the tape.
3
Fast forward the tape to the end of the sequence to be replaced and press STOP (
27
).
4
Press 0000 (
21
) key to reset the counter.
5
Rewind the tape to the beginning of the sequence to be replaced and press PAUSE (
28
) key.
6
Press on REC (
29
) and finally start playing from the source so as to begin the insertion.
7
The insertion will automatically stop when the counter reaches 0000.
Auto Sequence Memory
☺
Thanks to Auto Sequence Memory, you can choose different sequences from a tape and
consecutively view them. If you are connected to another video recorder fitted with a compatible
PAUSE socket, it is possible to copy these sequences and to automatically carry out the editing.
1
Connect the CAM/PAUSE sockets of the two video recorders with the assembly cable.
2
Using a SCART/Peritelevision cable, connect the AV1 socket of this video recorder
(master) and the AV2 socket of a second video recorder (slave), which is, in turn
connected to the television by the AV1 socket.
3
Load the tape to be copied.
4
Load the blank tape in the other video recorder and select the AV2 socket.
5
Display the S
UMMARY
menu, select Tape controls option, then the Auto seq. Memory
line.
6
Find the beginning of the first sequence, validate with OK (
13
), then press
B
(
10
) key.
7
Find the end of the first sequence and validate with OK (
13
).
8
Repeat this process for the other sequences. Select the Start assembling line to begin
the editing and validate with OK (
13
).
22
Use
Audio Dubbing –
Auto Sequence Memory
This video recorder is not as precise as professional editing equipment.
☺
r93s_GB01 9/06/00 11:28 Page 22
