GB
GB
13
Use
☺
The NAVICLICK function enables you to display every channel’s
programme on your screen and to programme your recordings for the
day with a simple click.
Consulting TV programmes with
NAVI
CLICK
1
Select a channel on your video recorder.
2
Press the GUIDE (
7
) key to display the NAVICLICK page.
☺
This function is available on most of the channels displaying the Teletext (for satellite channels first
select SA with the AV key).
Programming a recording with
NAVI
CLICK
1
Select a channel on your video recorder.
2
Press GUIDE (
7
) key and wait until the NAVICLICK page appears.
3
Press
▲
(
9
) and
▼
(
11
) keys to select the programme you wish to record.
4
Press OK (
13
) to validate your choice.
5
The T
IMER
R
EVIEW
menu appears. Verify your programming and press EXIT (
14
) to
exit the menu.
6
Switch off the video recorder to put it into standby mode.
Updating
NAVI
CLICK
☺
In the event of some channels modifying their teletext structure, except in the case of a total
modification of the structure, you can update the number of the first page of the teletext of the
programme guide.
1
Press MENU (
15
) key to display S
UMMARY
menu.
2
Select Installation line.
=> I
NSTALLATION
menu appears.
3
Select the NAVICLICK set up line.
4
The menu which appears indicates 3 numbers of the Teletext page channel by channel:
those of the current day's programmes, those of the following day's programmes and
finally those of the page reserved for sub-titles.
5
In order to update information, set the channel to be modified, set page number to be
corrected with
C
C
(
12
) or
B
B
(
10
) keys, and enter your corrections with keys 0 to 9
(
21
). Validate with OK (
13
).
r93s_UK01 9/06/00 11:32 Page 13
