5
Set-up
GB
GB
To control the TV set.
To switch your television on* or off.
Mute.
To adjust the sound volume.
To zoom in / zoom+.
To zoom out / zoom-.
To switch to another channel.
To select a SCART socket and watch
the pictures of the set connected to
this socket.
Programming the remote control with the TV code
This remote control can be used for controlling certain functions
of most television sets. To this end, you must programme it
with one of the codes provided in the table opposite or on
page 21 of this user manual.
1
Press the TV key on the remote control
2
Hold down the MENU key and enter one of the three-digit
code corresponding to the make of your television set (see the code table above or on page 21).
3
Release the MENU key and try to control the television set.
The codes depend on the television model. Should a given code not work, try another. When
you replace the batteries in the remote control, you will have to programme it again.
Controlling the television set
To control your TV set, you have to programme the remote control as explained above. Then all
you have to do is to press the
TV
key to control the TV set, and the
VCR
key to control again your
VCR.
*Keys for switching the television on and off depend on the model.
To switch the television set
on* or to select another
channel.
These keys have the same
function as the
corresponding keys on
the remote control of
your TV set (if it is of our
make).
BRANDT . . . . . . . . . . . . . .001-000-010-020
FERGUSON . . . .001-003-004-000-010-020
NORDMENDE . . . . . . . . . .001-010-020-000
SABA . . . . . . . . .001-000-005-010-019-020
TELEFUNKEN . . . . . . .001-002-000-010-020
THOMSON . . . . . . . . .001-000-002-010-020
Brand of your TV set
Code
These two
functions are
available only
with TV sets of
our make.
X10_GB04 26/04/01 16:57 Page 5
