9
O
ther connections
Set-up
GB
GB
Press the STATUS key to call up the control screen and select the socket AV1, AV2 or AV3 with
key AV of the remote control.
AV1 / AV2 sockets
The pictures from another set operating in the play mode and connected to AV2 are conveyed
to the socket AV1. When your television is connected to this socket, you can watch the pictures
from the set connected.
AV3 sockets
Connect your camcorder to the AUDIO L (left),
AUDIO R (right), VIDEO sockets located at the
front of the VCR and to the CAM/PAUSE socket
located at the back (if your camcorder is fitted
with such a socket). Select Au 3 on your video
recorder.
With compatible camcorders, the PAUSE socket facilitates copying by triggering the recording
mode of the video recorder as soon as the camcorder switches over from PAUSE to PLAY. The
video recorder must be switched on Record Pause.
AV4 sockets
Audio/Video or Dolby Pro Logic amplifier
The two cinch sockets AUDIO OUT (red and white) and the cinch socket
VIDEO OUT (yellow) located at the back of the VCR enable you to connect
your video recorder to an Audio/Video amplifier.
Hi-Fi system
The two cinch sockets AUDIO OUT (red and white) located at the
back of the VCR enable you to connect your video recorder to a Hi-
Fi stereophonic system. Thus, you'll be able to reproduce all the
sound effects of your tapes (musicals, films…) on your Hi-Fi system.
“DOLBY”, “Prologic” and the double-D symbol
are trademarks of DOLBY Laboratories
Licensing Corporation.
L
AUDIO
R
VIDEO
Satellite receiver
Other video recorder
Decoder
DVD
Camcorder
TV set
Video disk player
X10_GB04 26/04/01 16:57 Page 9
