3
G
Operating instruction
Thank you for choosing a Thomson product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you sell the
device, please pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
•
TV wall bracket
•
Cable guide
•
Installation kit (see contents, Fig. 1)
•
These operating instructions
3. Safety Notes
Warning
•
Given the multitude of terminal devices and wall structures available on the
market, the supplied mounting kit is unable to cover every option.
•
It occasionally happens that the screws for attaching the terminal device to
the wall bracket are too long.
•
Please note that the supplied wall plugs are for use with concrete brick and
solid brick walls only.
•
Read the operating instructions for your terminal device before attempting
to mount it. The instructions provide information about the type and
measurements of suitable fastening materials.
•
If the supplied mounting kit does not contain suitable fastening materials
for mounting the terminal device, purchase these from a specialised dealer.
•
If the wall on which the bracket is to be mounted is made of different
material types and construction types to those specified, purchase suitable
mounting materials from a specialised dealer.
•
Never apply force during mounting. This can damage your end device or
wall bracket.
•
If in doubt, have this product mounted by a qualified technician - do not
attempt to mount it yourself!
•
Do not mount the product above locations where persons might linger.
•
Once you have mounted the product and the attached load, check that they are
sufficiently secure and safe to use.
•
You should repeat this check at regular intervals
(at least every three months).
•
When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions
is attached.
•
Make sure that the product is loaded symmetrically.
•
During adjustment, ensure that the product is loaded symmetrically and that the
maximum permitted carrying capacity is not exceeded.
•
Maintain the necessary safety clearance around the attached load (depending
on the model).
•
In the event of damage to the product, remove the attached load and stop using
the product.
4. Intended use and specifications
•
The bracket is used for wall mounting flat panel displays for non-commercial,
private household use.
•
The bracket is only intended for use within buildings.
•
Use the bracket only for the intended purpose.
Maximum load bearing
capacity:
20 kg
Screen size:
25,0 - 117,0 cm (US: 10" - 46")
Depth:
5.7 - 18.4 cm
Angle:
+/- 15° (depends on the device)
Pivoting range:
Up to 180° on 2 joints and 1 carrier arm (depends
on the device)
Wall mounting plate
dimensions:
5.0 x 15.0 cm
Mounting holes:
according to the VESA standard 200x200
5. Installation requirements and installation
Note
•
Only mount the TV wall bracket with the help of a second person. Get the
support and help you need.
•
Different end devices have different options for connecting cables and other
devices. Before installation, ensure that the necessary connections will still
be accessible after installation.
•
The same mounting kit is included with all of our TV wall brackets.
Depending on the product and mounting type, you may not need to use
the entire mounting kit. Unneeded screws and other small parts may be
left over, even if the wall bracket is properly mounted. Keep these leftover
parts with the operating instructions in a safe place, just in case you might
need them later on (e.g. should you move, sell the product, mount the wall
bracket in a different location, buy a new TV, etc).
Warning
•
Before installing the bracket, ensure that the wall on which the television
is to be mounted is suitable for the weight and make sure that no electrical
wires, water, gas or other lines are located at the installation location.
•
Please note that the provided wall anchors are only approved for concrete
and solid brick walls.
•
Observe the other warnings and safety instructions.
•
Proceed step-for-step in accordance with the illustrated installation instructions
(Fig. 1 ff.).
•
During installation, the hinges are to be adjusted so that the TV can be moved
side-to-side.
6. Setting and maintenance
Warning
Only adjust the TV wall bracket with the help of a second person. Get the
support and help you need.
•
To adjust the inclination, loosen the side mounting screws slightly, set the desired
angle and retighten the screws securely.
•
Check that the bracket is secure and safe to use at regular intervals (at least every
three months). Only use water or standard household cleaners for cleaning.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
Summary of Contents for WAB7465
Page 21: ...19 ...
