6
Note – Google Assistant
•
The Google Assistant is only available on suitable terminal devices with
Android 5.0 or
higher
, Google Play Services, > 1.5 GB of free memory and a minimum screen resolution
of 720P.
•
The
Google Assistant app
must be available on your terminal device and set as the
default voice assistant.
Note – Voice Assistant
This function is only available while the earphones are connected to your smartphone via
Bluetooth
®
.
To start communication with your Siri or Google Assistant, proceed as follows:
•
Example 1:
Press and hold one of the two
Multifunction buttons
(2) for 2 seconds. A brief acoustic
signal sounds, followed 1 second later by a longer acoustic signal. Then speak into your
earphones: ‘What’s the weather like today?’ The voice assistant will answer as follows, for
example: ‘Mainly cloudy with some showers’
•
Example 2:
Press and hold one of the two
Multifunction buttons
(2) for 2 seconds. A brief acoustic
signal sounds, followed 1 second later by a longer acoustic signal. Then speak into your
earphones: ‘What time is it?’ The voice assistant will answer as follows, for example: ‘It is
8 pm’
•
Other examples:
Set an alarm for tomorrow at 7 am.
Play music.
What’s in the news?
5.4.1 Redial
•
Press and hold one of the two
Multifunction buttons
(2) for 2 seconds. A brief acoustic
signal sounds, followed 1 second later by a longer acoustic signal. Then say ‘Redial’ to call
the number of the last call.
5.4.2 Volume control
•
Press and hold one of the two
Multifunction buttons
(2) for 2 seconds. A brief acoustic
signal sounds, followed 1 second later by a longer acoustic signal. Then speak into your
earphones: ‘Increase the volume by 50%’ or ‘Decrease the volume by 30%’ or ‘Maximum
volume’. Your voice assistant adjusts the volume as requested.
•
Alternatively, you can control the volume using your smartphone.
5.5. Audio playback
•
Press one of the two
Multifunction buttons
(2) twice to go to the next track.
•
Press one of the two
Multifunction buttons
(2) three times to go to the previous track.
•
Briefly press one of the two
Multifunction buttons
(2) to start or stop audio playback.
5.6. Disconnecting the earphones
•
Switch off the earphones as described in Point 5.
•
Disconnect the earphones via the
Bluetooth
®
settings on your terminal device.
