Thor Broadcast H-16RCA-RF-MOD User Manual Download

Page: 8 / 17

12 WEB MANAGEMENT

12.1 LOGIN

The H-16RCA-RF-AMOD has a friendly user interface for programming and monitoring
to the built-in web UI by logging into Google Chrome

The default user name and the default password are
Username:

user

Password:

user

12.2 SYSTEM STATUS

You can quickly check out the modulator’s working status here.

12.3 BASIC PARAMETERS

Please make sure your computer is in the same IP segment as the modulator is.

interface for programming and monitoring the device. The user

Google Chrome, Firefox or Microsoft Edge accounts. (The best browsers)

The default user name and the default password are the following:

s working status here.

Please make sure your computer is in the same IP segment as the modulator is.

. The user can get access

. (The best browsers)

Please make sure your computer is in the same IP segment as the modulator is.

Summary of Contents for H-16RCA-RF-MOD


















Search results

Summary of Contents for H-16RCA-RF-MOD

Reviews:

Related manuals for H-16RCA-RF-MOD

Brands by name

Popular brands

Thor Broadcast H-16RCA-RF-MOD, User Manual

Search results

Summary of Contents for H-16RCA-RF-MOD

Reviews:

Related manuals for H-16RCA-RF-MOD

Brands by name

Popular brands