H‐HDMI‐CC‐RF
System →: Network
Click
“
Network, it will display the interface as in Figure-4 where to set network parameters.
Here you can change the device network configuration as needed.
Figure-4
System →: Firmware
From the menu on left side of the webpage, clicking “Firmware”, it will display the screen as
in Figure-5.
Figure-5
System →: Password
From the menu on left side of the webpage, click “Password”, it will display the screen as in
Figure-6 where to set the login account and password for the web NMS. After inputting the
current and new Username and Password, click “Apply” to save the configuration.
