Thor Digital
12
SDMET Series Manual V1.0
1 Video Input
– Use the Scroll Up/Down button to select 1 Video Input. Press the OK
button to enter the 1 Video Input menu. Use the Scroll Up/Down button to select the
Video Input option: NTSC, PAL, ASI. The factory default is NTSC. Press the OK button to
set. If the modulator has more than one video input scroll through the Advanced Menu
for the additional video input menus.
1 Program Num
– Use the Scroll Up/Down button to select 1 Program Num. Press the
OK button to enter the 1 Program Num menu. Use the Scroll Up/Down button to select
the desired 1 Program Num option ranging from 0 to 65535 then press the OK button to
set. Factory default is
4173
. If the modulator has more than one video input scroll
through the Advanced Menu for the additional Program Num menus.
1 Channel Name
– Use the Scroll Up/Down button to select 1 Channel Name. Press the
OK button to enter the 1 Channel Name menu. Use the Scroll Up/Down menu to select
the first character of the desired Channel Name then press the OK button to set. Repeat
the process until the Channel Name is completed. If the modulator has more than one
video input scroll through the Advanced Menu for additional channel name menus.
1 Provider Name
– Use Scroll Up/Down button to select 1 Provider Name. Press the OK
button to enter the 1 Provider Name menu. Use the Scroll Up/Down button to select the
first character of the desired 1 Provider Name then press the OK button to set. Repeat
the process until the desired Provider Name is completed. If the modulator has more
than one video input scroll through the Advanced Menu for additional Provider Name
menus.
1 LCN
– Use the Scroll Up/Down button to select 1 LCN. Press the OK button to enter
the 1 LCN menu. Use the Scroll Up/Down button to select the desired LCN value then
press the OK button to set. The 1 LCN value range is from 1 to 999. If the modulator has
more than one video input scroll through the Advanced Menu for additional LCN menus.
1 Aspect Ratio
– Use the Scroll Up/Down button to select 1 Aspect Ratio. Press the OK
button to enter the 1 Aspect Ratio menu. Use the Scroll Up/Down button to select the
desired Aspect Ratio option of 4:3 or 16:9 then press the OK button to set. Factory
default is 4:3. If the modulator has more than one video input scroll through the
Advanced Menu for additional Aspect Ratio menus.
To
exit the Advanced Menu
use the Scroll Up/Down button to select Exit then press the OK
button. Exit Exit Menu will appear on the LCD screen. Press the OK button twice to exit.
Once the settings are made and the modulator is programmed (a) remove power from the unit
by disconnecting the power supply cable from the DC 12V jack, (b) wait 5 seconds and (c)
reconnect the power cable to the unit
’s DC 12V jack. This will allow the modulator to capture the
new settings.
