Taking-Out and Installation of
The Lower Freezer Drawer
1.
Pull out the lower freezer drawer first.
2.
Take out the two fixed screws from the
partition plate of the lower freezer
drawer with screw driver and then take
off the partition plate.
3.
Take off the rear stopper for the lower
drawer as shown by Fig. A.
4.
Take out the lower drawer body with
force as directed by the arrows in Fig. B.
5.
The installation of the lower drawer
body is conducted in the reverse order.
You should install the lower drawer
body first and then install the rear
stopper for the lower drawer as shown
in Fig. C. Finally, both sides of the
drawer shall be connected to the
position shown by the arrows
respectively.
6.
The partition plate is installed into the
corresponding slots and then is fixed
with screws. The position of the
partition plate for the lower drawer
could be adjusted according to your
preference.
DO NOT remove the lower freezer drawer if
it’s
not necessary.
