Take Out, Clean and Install the
Ice Cube Box
lf the ice maker isn't used for a long period,
ice cubes that are just produced might have
unpleasant smell. You must take out and
clean the ice cube box.
Open the upper drawer in the freezer
compartment, rotate the knob of ice maker
counterclockwise by 90, turn the handle from
the horizontal position to vertical position to
release the lock (as shown in Fig. 1 of Pg. 14),
pull it out (as shown in Fig. 2 of Pg. 14) and
take out the ice cube box.
Rinse the ice cube box with warm water
below 60
℃
(140
°
F) and DO NOT use
detergent.
Air dry the ice cube box completely in case
that water droplets in the ice cube box might
cause abnormal functioning of the ice maker.
When the ice maker can't move, separate the
ice maker as shown in Fig. 1 and Fig.2. Then
install after ice cubes are melted.
Insert the ice cube box onto the rack
according to original sequence and rotate to
the locked position.
Locked status
Unlocked status
