57
Controls and Operations
InWall Slide Out
1. Completely retract the slide out.
2. Allow the motors to amp out and hold the switch for an additional 3-5 seconds.
3. Extend the slide out anywhere from 2-4 inches (enough to break the seal) and
stop.
4. Retract slide out again allowing the motors to amp out and holding the switch for
3-5 seconds.
5. Repeat this 3 times.
6. On the 4th time, FULLY extend the slide out and hold the switch until the motors
amp out and for an additional 3-5
7. FULLY retract the room and hold the switch until the motors amp out and for an
additional 3-5 seconds.
Controller
Timing the
Schwintek slide
out system
Status LEDs
- 2 led’s, 1 green and 1 red, are provided to indicate current controller
status and faults.
Motor Direction Switches
- Used to change direction of motors, 2 are provided, 1
for each motor.
Mode Button
- Places controller in manual mode, for jogging individual motors.
Places controller incalibration mode, where stall current can be
increased or decreased or returns controller to auto mode.
Power Source
- 12 volt DC input. Unit will operate from 8 volts DC to 18 volts DC.
Motor 1 Connector
- Power and encoder input for motor 1.
Direction switch connector
- Provides input from customer supplied extend and
retract switch.
Stall Calibration
- Allows for adjustment of stall force.
Motor 2 Connector
- Power and encoder input for motor 2.
Summary of Contents for Palazzo 2015
